Wep Key Settings; Wpa Security Settings; X Security Settings - Nokia E52 User Manual

The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When the WEP security mode is in
use, and your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
WEP key in use
•
Authentication type
•

WEP key settings

•
key.
WEP key settings
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings
and from the following:
WEP encryption
•
encryption key length.
WEP key format
•
enter the WEP key data in
format.
WEP key — Enter the WEP key data.
•

802.1x security settings

Select 802.1x as the WLAN security mode.
144
and from the following:
— Select the desired WEP key.
— Select Open or Shared.
— Edit the settings for the WEP
WEP key settings
>
— Select the desired WEP
— Select whether you want to
ASCII or Hexadecimal
802.1x authenticates and authorises devices to access
a wireless network, and prevents access if the
authorisation process fails.
Select WLAN security settings
WPA/WPA2 — Select
•
Authentication Protocol) or
secret key used for device identification).
EAP plug-in settings
•
WPA2 > EAP, select which EAP plug-ins defined in
your device to use with the access point.
Pre-shared key — If you selected
•
Pre-shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.

WPA security settings

Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings
WPA/WPA2 — Select
•
Authentication Protocol) or
secret key used for device identification).
EAP plug-in settings
•
WPA2 > EAP, select which EAP plug-ins defined in
your device to use with the access point.
Pre-shared key — If you select
•
shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WPA2 only mode — To allow both TKIP and AES
•
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select
and from the following:
EAP (Extensible
Pre-shared key (a
— If you selected WPA/
WPA/WPA2
and from the following:
EAP (Extensible
Pre-shared key (a
— If you select WPA/
WPA/WPA2 Pre-
>
On
>