Pfaff creative 7570 Instruction Book page 86

4
[
[
nfo menu
Pattern sequences consisting of maxi patterns
[
p
from Design Cards
th
Within an M-memory, pattern sequences can
,t
be created not only from the machine's maxi
patterns but also from the maxi patterns of the
Design Cards (see Page 60).
To this end select a free M-memory and open it
by pressing "o.k.' Insert a Maxi Design Card in
""
slot (47) on the machine and press the "card"
t key (14).
Select the desired pattern with the corresponding
key. It will be highlighted. Confirm with "o.k.";
the memory screen will be displayed. On the right
hand side of the display you will see the message
"Press o.k. to save".
Width and length can be changed before entering
the pattern. After that press "o.k." to confirm. The
pattern will appear in the programming screen.
The next pattern is selected with the "card" key
(14) again. The proceed in the same manner.
[
L
L
<-
1 2 3, 4 5
6
7
8
9 0
esc
84