Changing The Needle; Changing The Presser Foot; Threading - Pfaff hobbylock 4764 Operating Manual

1-6 Changing the needle

Replace the needles in the following order:
Unplug the machine.
1. Bring needles to its highest position by
turning the handwheel towards you.
2. Loosen the needle clamp screw and
remove two needles together.
3. With the flat side away from you, insert two
new needles all the way up into the groove of
the needle bar.
Use standard home sewing machine needles
size #11 (#75) or #14(#90).
1-7 Changing presser foot
Turn the machine off.
1. Raise the presser foot.
2. Raise the needles to its highest position by
turning the handwheel towards you.
3. Push the red button and the foot will come
off.
4. Place the new foot with the pin right
underneath the groove of the ankle and lower
the presser foot. The foot will snap back into
place.

2. Threading

2-1 Threading
When threading the machine from the
beginning, threading must be carried out in
the following sequence:
First: Upper looper threading (A)
Second: Lower looper threading (B)
Finally: Needle threading (C, D)
8