Sewing Curved Seams; Setting Waste Tray; 3-Thread Overlock Stitch Using 1 Needle - Pfaff hobbylock 4764 Operating Manual

Sewing curved seams

For inside curves, guide the fabric gently with
the trimming line of the fabric under the
right front of the presser foot.
By applying pressure to the fabric with your
left hand, at the same time, apply a little
pressure in the opposite direction with your
right hand as shown.
For outside curves, apply pressure in the
opposite direction of the above.

3-2 Setting waste tray

Insert the right of the waste tray to the right
leg of the machine as illustrated.
Turn the left end of the waste tray in the
direction of arrow.
3-3 3-thread overlock stitch using
1 needle
Though this machine is used mainly for
4-thread overlock using 2 needles, 3-thread
overlock with 1 needle can be easily operated
by just removing either needle.
Use 3-thread stitch for decorative purposes.
18