Using The Lcd Monitor; Emphasizing Image Outlines - Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Using the LCD monitor

1
Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
2
Open the LCD monitor.
The monitor opens to an angle of 90°. The
camera may be damaged by attempting to open
it further than this.
3
Position the screen of the LCD monitor
where it is the easiest to see.
• The monitor can be rotated 180° toward the
lens and 90° toward you.
• Do not apply unnecessary force to the
open LCD monitor. This can damage the
camera.
• When closing the LCD monitor, ensure that it
is closed.
• Operation status displays when shooting a
self-portrait
No display: You cannot record (no memory
card, etc.)
[ ]: Shooting in progress, during transition to
shooting pause
[ ]: Shooting paused (shooting standby)
[ ]: Warning display in progress
6

Emphasizing image outlines

Emphasizing the outlines of images in the
viewfinder or the LCD monitor makes it easier to
focus.
Emphasizing outlines does not affect recorded
images.
1
In <CAMERA> mode, press the <EVF DTL>
button.
[EVF DTL ON] appears in the center of the
screen for approximately two seconds.
<EVF DTL>
button
Press the <EVF DTL> button again to return
to the original display. Then, [EVF DTL
OFF] appears in the center of the screen for
approximately two seconds.