Playback Settings [Play Setup]; Setting Playback Format [Pb Format]; (Only In Avchd Mode); Repeat Playback [Repeat Play] - Panasonic AVCCAM AG-AC160P Operating Instructions Manual

Playback settings [PLAY SETUP]

Make settings for playback format and method.

Setting playback format [PB FORMAT]

(only in AVCHD mode)

Set format for playback.
1
Press the <MENU> button.
Menu operation (Page 31 of Vol. 1)
2
Select the [PB FORMAT] item in the [PLAY
SETUP] screen, and push the OPERATION
lever (or tilt in the
3
Tilt the OPERATION lever in the < >< >
directions to select the format for playback,
and push the OPERATION lever.
• The setting for the [REC FORMAT] item
on the setup menu [RECORDING SETUP]
screen is reflected as the initial setting.
• Clip numbers will be displayed in black
where playback is possible, and in red where
playback is not possible.
• Even if the playback format is set, the
recording format set in the [REC FORMAT]
item on the setup menu [RECORDING
SETUP] screen is restored when the camera
is switched to <CAMERA> mode.
• If the playback format does not conform to the
clips created at the relay destination using the
relay recording function, thumbnail images
will not be displayed ([!] will be displayed).
Thumbnail images will be displayed when the
playback format is matched to the clips.
58
direction).

Repeat playback [REPEAT PLAY]

Use this setting to repeatedly play back all
available clips on the selected slot.
1
Press the <MENU> button.
Menu operation (Page 31 of Vol. 1)
2
Set the [REPEAT PLAY] item in the [PLAY
SETUP] screen to [ON].
3
Press the <MENU> button to return to the
thumbnail screen.
The repeat playback indicator will be displayed.
When the playback operation is performed, the
playable clips are played back repeatedly.
• Repeat playback will continue until playback
is paused.
• To turn the repeat playback setting [OFF],
select [OFF] in step
2
.