KitchenAid KEBS277W Use And Care Manual page 26

Extending the automatic
self-clean cycle:
If your oven is excessively dirty and
requires longer cleaning time, the
Automatic Self-Clean cycle can be
extended for up to 4 hours.
I. Follow steps I, 2, 3 and 4 under
"'Starting the automatic self-clean
cycle.'"
2. When "STOP TIME" appears in the
Display Window, turn the TIME
knob to the right until the desired
length of cleaning time is displayed.
Remember, you will be adding time
to the normal 2'/2 hour cleaning
time.
IMPORTANT: A self-cleaning time
longer than 4 hours cannot be
selected.
3. Touch the STARTbutton to lock in
the new stop time and return the
clock to the present time of day.
4. "'AUTO" will appear in the Display
Window and the Self-Clean cycle
will begin. No end of cycle tone
will be given.
Combining the delayed and
extended self-clean cycle options:
An Automatic Self-Clean cycle can be
both delayed and extended, if desired.
1. Follow steps 1,2, 3 and 4 under
"Starting the automatic self-clean
cycle.'"
2. Set the delayed start time by
turning the TIME knob until the
new start time appears in the
Display Window.
3. Touch the STARTbutton to lock in
the new start time. "'STOPTIME'"
and the actual cleaning stop time,
2'/2 hours from the selected start
time, will appear in the Display
Window. Turn the TIME knob until
the new cleaning stop time appears
in the Display Window. 4 hours is
the longest cleaning time that can
be selected.
4. Touch the STARTbutton again to
lock in the new stop time and
return the clock to the present time
of day.
26
,
"'AUTO" will flash in the Display
Window until the Self-Clean cycle
begins. Once the cycle is in
progress, "AUTO" will appear
continuously. No end of cycle tone
will be given.
What happens during the
self-clean cycle?
The oven not being cleaned will not
heat even though the controlsare set.
After the controls have been set
on a non-delayed cycle, or after the
delayed time haselapsed on a
delayed cycle:
• The Oven Cycle Light will glow to
tell you the oven isON.
• The Clean Indicator Light will glow
to tell you the oven is slowly heating
to the clean temperature, and
"'AUTO" will appear continuously in
the Display Window.
• The Lock Indicator Light will come
on when the temperature reaches
575°F - 600°F (approximately 15
minutes).
At the end of the Self-Cleancycle:
• The Clean Indicator Light will go out.
• The Lock Indicator Light will continue
to glow until the oven temperature
drops below 550°£ The oven door
cannot be opened until the Lock
Indicator Light goes out. Do not turn
Temperature Control or Selectorto
"'OFF" until Lock Indicator Light
goes out.
To stop the self-clean cycle
at any time:
1. Touch the STOP/CANCEL button
twice. A tone will sound each time
and the clock will return to the
present time of day.
2. Slide Oven Lock Lever all the way
to the left,
,
IMPORTANT: If the Lock Indicator
Light has come on, wait until
oven cools and light goes off before
sliding Lock Lever back to the left.
Do not force it. Wait until it
moves easily,
Turn the Selector to OFF and the
Temperature Control fully
counterclockwise.