KitchenAid KFP750 Instructions And Recipes Manual page 14

Disassembling the Food Processor
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
5. The multipurpose blade carl be
removed from the work bowl
before the contents are emptied.
The blade can also be held in place
as you remove food: grasp the
work bowl from the bottom and
place one finger through the center
opening to grip the blade shaft.
Then remove food from the bowl
and blade with a spatula.
;;:: ? _ :;:S
/
Cleaning the Food Processor
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
1. Press the Off Button and unplug
the Food Processor before
cleaning.
2. Wipe the base and cord with a
warm, sudsy cloth, and wipe clean
with a damp cloth. Dry with a soft
cloth. Do not use abrasive
cleansers or scouring pads.
3. All the other parts of the Food
Processor are dishwasher safe. Be
sure to load them away from
exposed heating elements in the
dishwasher. If washing the Food
Processor parts by hand, avoid the
use of abrasive cleansers or
scouring pads. They may scratch
or cloud the work bowl and cover.
Thoroughly dry all parts after
washing.
4. To prevent damage to the interlock
system, always store the work bowl
and work bowl cover in the
unlocked position when not in use.
{
5. Wrap the power cord around the
work bowl. Secure the plug by
clipping it to the cord.
6. Disassembled discs, shafts, and
blades should be stored in the
provided storage case, and in a
location out of the reach of
children.
12