Door Closing - KitchenAid KBCA06XPBS00 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

8.
IMPORTANT:
Besure toproperly align thedoor c loser-top
bosses w iththeholes inthehinge plate.
Remove thedoor c losers f rom theoldbottom hinge and
install them onthenew bottom hinge
IMPORTANT:
Besure toproperly align thedoor c loser-
bottom bosses w iththeholes inthebottom hinge.
A. Door closer (top)
B. Door closer (bottom)
C. Bosses
9. Remove the three screws from the old bottom hinge and
remove the hinge.
10. Turn the old bottom hinge upside down and reinstall on the
top, opposite side of the refrigerator. Remove the hinge pin.
11. Turn the door upside down so the bottom of the door is
facing up. Remove the two screws from the pivot plate and
remove the plate.
12. Flip the plate over and reinstall it on the opposite side of the
door.
J
tj
13. Turn the door over so that the top of the door faces up.
14. Tilt the door forward and place the hole of the pivot plate on
the new bottom hinge pin.
I
I
I
B
A. Pivot plate
B. Boss
15. Align the door with the top hinge and install the hinge pin.
16. Install the six plastic screw plugs in the old hinge holes on the
top and the bottom of the cabinet.
Door Closing
Your refrigerator has four leveling legs. If your refrigerator seems
unsteady or you want the door to close more easily, adjust the
refrigerator's tilt using the instructions
below:
EmectricaI Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Faimure to follow
these instructions
can resumt in death,
fire, or emectrica{ shock.
1. Plug into a grounded 3 prong outlet.
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
2. Move the refrigerator into its final location.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kbca06xpbl00Kbca06xpwh00

Table of Contents