Installation Requirements - KitchenAid KFFU271 Use & Care Manual
Freestanding and built-in outdoor refreshment center
Hide thumbs
Also See for KFFU271:
Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
•
Level
•
Phillips screwdriver
•
Short Phillips screwdriver or a 90 ° screwdriver with a Phillips
screw bit
•
Tape measure
•
Slip-joint pliers
•
Pipe wrench
•
Adjustable wrench
Parts needed
•
NSF or UPC listed water connection lines or hose
•
All weather clear silicone
IMPORTANT:
Observe all governing codes and ordinances.
Product Dimensions
Freestanding Models
The freestanding model must have suitable drain systems in
accordance with local codes for the ice bin and sink drains.
B
Built-In Models
C
D
C
A. 26%" (67.0 cm)
B.30" (76.2 cm)
C. 10"
(25.4
cm)
D. 223/4 '' (57.8 cm)
Cabinet
Dimensions
(for built-in model)
Provide suitable drain systems in accordance with local codes for
ice bin and sink drains. The drains and filter must be accessible.
A. 171/4 '' (43.8 cm)
B. 30" (76.2 cm)
C. 36%" (93. 7 cm)
D. 26%" (67.0 cm)
Advertisement
Table of Contents
