Advertisement
Available languages
Available languages
OPTIONS
DISH LOAD TYPES
DESCRIPTIONS
USE WITH:
Control
Lock
m
I
Heated _
Dry ,_
To avoid unintended use of
your dishwasher, or cycle and
option changes during a cycle.
To turn on Lock, press and hold HEATED DRY for at least
4 seconds.
To turn off Lock, press and hold HEATED DRY for at least
4 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
Anytime
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance.
If the incoming water is less than the recommended
temperature or food soils are heavy, the cycle
will automatically compensate
by adding time, heat and water as needed.
CONTROL
PURPOSE
COMMENTS
power is interiupted, the StartJResume !ight will
[]
To start or resume a
If the door is opened during a cycle orthe
wash cycle
flash to indicate suspended cycle. The cycle will not resume until the door is closed and the
Start/
START/RESUM E button is pushed.
;
Resume
m
Cancel
]
To cancel wash cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
[]
To
follow the progres s
The C!ean indicatoi g!0ws Whena Cycle is finished.
and status of your
If you select the Sanitize option, when the Sani Rinse cycle is finished, the Sanitized indicator
Clean
dishwasher cycle
!
glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of
the cycle. This can happen if the cycle is interrupted, Or the water could not be heated to the
required temperature. The light goes off when you open and C!OSethe door or press
Advertisement
