Download Print this page

Jenn-Air JDB8200AWP0 User Instructions page 10

Maytag
Hide thumbs Also See for JDB8200AWP0:

Advertisement

Available languages

Available languages

OPTIONS
Runs t hedishwasher
ata
later t ime orduring off-
peak e lectrical hours.
Select awash cycle and
options. Press 4 Hour
Delay. Press S TART/
RESUME.
Close t hedoor
firmly.
NOTE: Anytime thedoor i s
opened ( such as,toadda
dish), theSTART/RESUME
button must b epressed
again toresume thedelay
countdown.
CAN BE
SELECTED WITH
WHAT IT DOES
Available with
any cycle
Delays the start of a
cycle up to 4 hours.
ADDED TIME TO CYCLE
TYPICAL
MAX
240
240
ADDED
WATER
GALLONS
(LITERS)
0
Control
Lock
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cYCle,
To turn on Lock press and hold CONTROL LOCK or 4 HOUR DELAY(depending
on model)for 3 seconds. The Control
I_
Lock light Will stay on for a short time, indicating that it is activated, and a!! buttons are disabled, If you press any button
!i!!!!_!!
while your dishwasher is loCked, the light flashes 3 timesl -l-he dishwasher do0r can still be opened/closed
while the
or
controls are locked.
To tuin off Lock, press and h01d CONTROL LOCK or 4 HOUR DELAY (depending on model)for3
sec0nds:The
light
I_
turns off.
NOTE" If your model requires you to press and ho!d 4 Hour De!ay to lock the controls, the Control Locked LED will be
on or off to indicate if the Control Lock is active or not.
CONTROL
PURPOSE
COMMENTS
To
stait or resume a
If the door is opened during a CYcle or the power is interrupted, the START/RESUME
| _
wash cycle
indicator
f ashes. The cycle wil! not resume until the door is c osed and START/RESUME is
pressed.
NOTE, If the START/RESUME button is located ont0P of deer, push door firmly cl0sed
within 3 seconds of pressing START/RESUME. If the door is not closed within 3 seconds,
the start button LED wi!l flash, an audible tone wi!! be heard, and the cycle wi!! not start.
To reset any cycle or
| _
options during
selection.
To cancel a wash
cycle after it's
started.
Press CANCEL/DRAIN to reset any control selections made.
See "Canceling A Cycle After Dishwasher Is Started" and "Changing a Cycle After
Dishwasher is Started" sections.
To turn the audible
Press and h0!d the super Sciub button foi 3 Seconds to turn the audible tones on or off.
i_
tones on or Off.
Only audible tones for confirming button presses canbe turned on!off. Important audib!e
_,,_o_,0r,:_so_
tones, such as indicating a cycle has been interrupted, cannot be deactivated.
i
10

Hide quick links:

Advertisement

loading