GE JTS10 Owner's Manual page 5

27/30" electric built-in single wall oven
Hide thumbs Also See for JTS10:
Table of Contents

Advertisement

Available languages

Available languages

Using the oven controls.
Throughout
this manual, features and appearance
may vary from your model.
GEAppliances.com
OVEN CONTROLS
AUTOMATIC OVEN
Oven Control, Clock and Timer Features and Settings
BAKE/TEMP RECALL Pad
Pressthis pad to select the bake function.
BAKE Light
Flasheswhile in edit mode-you can change the
oven temperature at this point. Glows when the
oven is in bake mode.
START/ON Pad
Must be pressedto start any cooking function.
Display
Shows the time of day, oven temperature, whether
the oven is in the bake or broil mode and the times
set for the timer or automatic oven operations.
The display will show "PrE"while preheating. When
the oven reaches the selected temperature, the
oven control will beep and the display will show
the oven temperature.
If "F-" and a number
or letter flash in the display
and
the oven control signals,
this indicates
a function
error
code. Press the CLEAR/OFF pad. Allow the oven to cool
for one hour. Put the oven back into operation.
If the
function
error code repeats,
disconnect
the power
to
the range and call for service.
Ifyour oven was set for a timed oven operation
and a
power
outage
occurred,
the clock and all programmed
functions
must be reset.
The time of day will flash in the displuy when there has
been a power outage. Reset the clock.
KITCHEN TIMER ON/OFF Pad
Touch this pad to select the timer feature. Then
press + and - pads to adjust time.
TIHER Light
Flasheswhile in edit mode-you can change the set
time at this point. Glowswhen the timer has been
activated. Flashesagain when the time has run out
until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and then
press the + and - pads. The time of day will flash in
the display when the oven
isfirst turned on.
DELAYSTARTPad
Use along with the COOKINGTIME pad to set the
oven to start and stop automatically at a time you
set.
DELAYSTART Time Light
Flasheswhile in edit mode-you can change the
delay start set time at this point. Glowswhen the
function has been activated.
COOKING TIMEPad
Pressthis pad and then touch the + or - pads to
set the amount of time you want your food to
cook. The oven will shut off when the cooking time
has run out.
COOKING TIMELight
Flasheswhile in edit mode-you can change the set
time at this point. Glowswhen the function has been
activated. Flashesagain when the time has run out
until the control is reset.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jks10

Table of Contents