Proper Burner Adjustments; Placement Of Burner Bases And Caps; Placement Of Burner Grates - Frigidaire CPLCF489DC4 Use & Care Manual

Proper Burner
Adjustments
The color of the flame istile key to proper burner adjustment. A good flame is clear,
blue and hardly visible in a welPlighted room. Each cone of flame should be steady
and sharply defined. Adjust or clean burner if flame is yellow-orange. To adjust the
flame seethe Installation Instructions and to clean burner, see instructions under
General Cleaning.
Placement of Burner
Bases and Caps
Your Cooktop is equipped with three different sizes of burners: Power Burner,
Standard Burner and Simmer Burner.
Placethe burner base over each gas opening, matching the burner base size with the
gas opening size. Placethe burner cap on each burner base, again matching the cap
size to the burner base size. Tile cap for each burner has an inner locating ring which
locates the burner cap in the center of the burner.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner does not light, contact
a Service Center. Do not service the sealed burner yourself.
Placement of Burner
Grates
Grate
Place grate over burner pans. Make sure that the groove under grate fits over the
raised lip of tile burner pan. The rounded corners of the grates should be placed
toward the front of the cooktop for the front burners and tile rear of the cooktop for
the back burners.
Burner pan
lip