Clean lint screen after every load.
Do not store or place laundry
on top of dryer at any time. They can
To reduce risk of fire or serious injury to persons or property, comply
with the basic warnings listed in _:oztant
Safety Znstructicms, pages 2-3, and
those listed below,
Before cleaning the dryer interior, ur[olug the electricsl
pswer cord to avoid
electrical shock hazards.
Do not use any type spray cleanser when cleaning dryer interior, Hazardous
fumes or electrical shock could occur,
Clean the lint screen after every load. Lint build-up in the screen restricts air
flow, which causes longer drying times, The screen is located at the bottom of
the door opening. Remove by pulling straight up, Remove the lint and replace
Occasionally a waxy build-up may form on the lint screen from using dryer-
added fabric softener sheets. To remove this build-up, wash the lint screen in
warm, soapy water. Dry thoroughly and replace. Do not operate the dryer
without the lint screen in place,
If the dryer drum becomes stained from noncolorfast fabrics, clean the drum
with a damp cloth and a mild liquid household cleanser. Remove cleanser
residue before drying the next load.
Every 18 months an authorized servicer should clean the dryer cabinet interior
and exhaust duct. These areas can collect lint and dust over time. An excessive
amount of lint build-up could result in inefficient drying and possible fire hazard.
Clean the cabinet with mild soap and water. Never use harsh,
If the cabinet becomes stained, clean with diluted chlorine bleach [1/2 cup
(120 ml) in 1 quart (.95 liter) water], Rinse several times with clear water,
Remove glue residue from tape or labels with a mixture of warm water and mild
detergent, Or, touch residue with the sticky side of the tape or label,
place a strip of cardboard or thin fiberboard under
the front leveling legs to prevent damage to floor,