Table of Contents
Advertisement
Quick Links
Commercial Dryer
IMPORTANT!
Post instructions
in a prominent
location
to be followed
in the event the user
smells gas.
The information
to be posted
shall
be obtained
by consulting
with
the local gas
supplier.
Warning:
For you safety the information
in
this manual must be followed
to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or death.
--Do
not store or use gasoline or other
flammable
vapors and liquids in the vicinity
of this or any other appliance.
--WHAT
TO DO IF YOU SMELL GAS
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do
not use any phone in your building.
•
Clear the room, building or area of all
occupants.
•
Immediately call your gas supplier from
a neighbor's
phone. Follow the gas
supplier's instructions.
•
If you cannot reach your gas supplier,
call the fire department.
--Installation
and service must be performed
by a qualified installar, service agency or the
gas supplier
FOR YOUR SAFETY
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
Printed in U.S.A.
www.frigidare.com
PIN 137321800A
(1004)
Advertisement
Table of Contents
Related Manuals for Frigidaire FCGD2000LS0
Summary of Contents for Frigidaire FCGD2000LS0
- Page 1 Commercial Dryer IMPORTANT! Post instructions in a prominent location to be followed in the event the user smells gas. The information to be posted shall be obtained by consulting with the local gas supplier. Warning: For you safety the information this manual must be followed to minimize the risk of fire or explosion or to prevent property...
- Page 2 Table of Contents Installation Instructions ..........10-16 Product registration ............... Important Safety Instructions ..........Pro-installation Requirements ..........Use & Care Guide ............Electrical Requirements ..........Drying Procedures ..........Exhaust System Requirements ........10-11 Features................Gas Supply Requirements ........... Care and Cleaning ............Dryer Location ..............
- Page 3 ELECTR/C DRYERS: GAS DRYERS: Grounding type 14-30R wallrece Do not under any circumstances cut, DRYER remove or bypass the grounding prong from this plug FUSED 30 AMP 120/240 V OR DRYER 120/208 V WALL SER VI CE RECEPTACLE CORD Power supply cord with 3-prong CORRECT grounding plug...
-
Page 4: Important Safety Instructions
Important Safety Instructions Con 't • ALWAYS disconnect the dryer from the electrical supply before attempting any service or cleaning. Failure to do so can result in electrical shock or injury. Do not use any type spray cleanser when cleaning dryer interior. Hazardous fumes or electrical shock could occur. To prevent injury, do not reach into the dryer if the drum is moving. -
Page 5: Features
Features End of Cycle Signal A signal will sound at the end of the cycle and periodically during Extended Tumble at the volume level selected. (some models) Drum Light (some models) A drum light will come on whenever the door is opened to illuminate the dryer drum during loading and unloading. -
Page 6: Care And Cleaning
Care and Cleaning con 't Outside • Clean the cabinetwith mild soap and water. Neveruse harsh, gritty or abrasive cleansers. If the cabinet becomes stained, clean with diluted chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 liter) water]. Rinse several times with clear water. Remove glue residue from tape or labels with a mixture of warm water and mild detergent. -
Page 7: Avoid Service Checklist
Avoid Service Before calling for service, review this list. It may save both time and expense. The list includes Checklist common occurrences that are not the result of defective workmanship or materials in this dryer. 0 CCURRENCE POSSIBLE CA USE SOL UTION Dryer does notstart. -
Page 8: Warranty
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux willpay all costs, exceptas set forth below, for repairing or replacing any parts of this appliance that prove to be defective inmaterials or workmanship when suchappliance is installed, used, and maintained in accordance with the provided instructions. -
Page 9: Operating Instructions
OPERATING INSTRUCTIONS Cool Down Dry Temperature Cycle Signal Auto LessDry Enfdamiento Timed Senai de ciclo Temperatura de secado Autosecado Menos Seco _ .....f_ Secado Regular More Dry ..T empo Quiet Start Button Medium Heat Low Heat Mas Seco \_J_ Silencio sa Boton de Encendido Temperatura... - Page 10 INSTALLATION INSTRUCTIONS PRE-INSTALLATION REQUIREMENTS GAS Dryer Tools and Materials Required for installation: CIRCUIT- Individual 15 amp. branch circuit fused with a 15 1. Phillips head screwdriver. amp. maximum time delay fuse or circuit breaker. 2. Channel-lock adjustable pliers. POWER SUPPLY - 3 wire, 120 volt single phase, 60 Hz, 3.
- Page 11 Risk of Fire - A clothes dryer must exhausted outdoors. Do not exhaust dryer into a chimney__ wall, a ceiling, an attic, a crawl space or any concealed space of a building A clothes dryer produces combustible lint. If the dryer is not exhausted outdoors some fine lint will be expelled INSTALL MALE FITTINGS IN CORRECT DIRECTION into the laundry area.
- Page 12 GAS SUPPLY REQUIREMENTS Replace copper connecting pipe that is not p/astic-coated, Stainless steel or plastic-coated brass MUST be used, 1. Installation MUST conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 (latest edition). 2.
-
Page 13: Mobile Home Installation
MOBILE HOME INSTALLATION UNDER COUNTER & STACK MODELS 1. Dryer MUST be exhausted outside (outdoors, not beneath ROUGH-IN DIMENSIONS the mobile home) using metal ducting that will not support combustion. Metal ducting must be 4 inches (10.16 cm)in diameter with no obstructions. Rigid metal duct is preferred. 2. -
Page 14: Unpacking
UNPACKING 1. Using the four shipping carton corner posts (two on each side), carefully lay the dryer on its left side and remove foam shipping base. FOAM To prevent damage, do not use the control panel as a means to pick up or move the dryer. NOTE: On under counter model clothes dryers, the top panel may be removed for installation. - Page 15 Grounding requirements - E/ectric dryer (CANADA) shock by a path of least resistance for electrical current. ELECTRICALSHOCK HAZARD improper 2. Sinceyourdryerisequippedwith a powersupplycord having connection of the equipment grounding conductor can result in a risk of electrical shock. Check with a licensed electrician if an equipment-grounding conductor and a grounding plug, the plug must be plugged into an appropriate outlet that is...
- Page 16 Elect#ca/connection (non-Canada) 4-wire cord- Con't Thread an UNPLUGGED, UL-approved, 30 amp. power cord, NEMA 14-30 type ST or SRDT, through the strain relief. Disconnect the internal (WHITE) dryer harness 4-wire ground wire from the (GREEN) ground screw next receptacle to the terminal block. (NEMA type Attach the ground (GREEN) power cord wire to 10-30R)