Electrolux EI26SS30JS3 Use & Care Manual page 26

Automatic ice & Water
aker/Dispenser
Turn off the ice maker when cleaning the
freezer and during vacations.
If you turn off the ice maker for a long
period of time, you should also turn off the
water supply valve.
ice maker/dispenser tips
= Ice cubes stored too long may develop
an odd flavor. Empty the ice container as
explained below.
• Occasionally shake the ice container to keep
ice separated.
= If your refrigerator is not connected to a
water supply or the water supply is turned off,
turn off the ice maker by pressing the On/Off
switch.
= If you need a large quantity of ice at one
time, it is best to get cubes directly from the
ice container.
= The following sounds are normal when the
ice maker is operating:
Motor running
Ice dropping into ice container
- Water valve opening or closing
Ice loosening from tray
Running water
• When dispensing ice, you will hear a
snapping or clicking sound when the ice
chute opens and closes.
Cleaning the ice maker
Clean the ice maker and ice bin at regular intervals,
particularly before you take a vacation or move.
To clean the ice maker:
1 Turn off ice production by pressing the ice
maker's Off/On switch.
2
3
Remove the ice bin by lifting up and out.
Empty and carefully clean the ice bin with
mild detergent. Rinse with clear water. Do not
use harsh or abrasive cleaners.
4 Allow the ice bin to dry completely before
replacing in the freezer.
5 Remove ice chips and clean the ice bin shelf
and the freezer door chute.
6 Replace the ice bin. Press the ice maker's
Off/On switch to resume ice production.
Remove and empty the ice storage bin
if:
= An extended power failure (one hour or
longer) causes ice cubes in the ice storage
bin to melt and freeze together, jamming the
dispenser mechanism.
• You do not use the ice dispenser frequently.
Ice cubes will freeze together in the bin,
jamming the dispenser mechanism.
Remove the ice storage bin and shake to loosen
the cubes or clean as explained above.