Self-Cleaning Cycledoes Not Work; Soil Not Completelyremoved After Self-Cleaning Cycleis Completed; Flamesinsideovenor Smokefromvent - Electrolux E36GF76HPS1 Use & Care Manual

Solutions to Common Problems
SELF-CLEANmNG CYCLEDOESNOTWORK
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Make sure the oven door is closed.
• Make sure the two oven rack ladders are removed from the oven.
• Controls not set properly. Follow instructions.
• Self-cleaning cycle was interrupted. Start a clean again, wait 20 seconds for the Lock
light to stop flashing, turn off the clean and wait again 20 seconds for the light to turn off.
SOILNOTCOMPLETELY REMOVED AFTERSELF°
CLEANmNG C YCLE_S COMPLETED
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
• Failure to hand clean oven frame and door liner outside the oven door gasket before
starting the self-clean cycle. Hand clean burned on residue with a stiff nylon brush and
water or a nylon scrubber. Do not clean the oven door gasket or it will be damaged.
[]
F_MES _NS_DE O VENOR SMOKEFROMVENT
[] [] [] [] [] [] [] [] 1 [] [] [] [] [] [] [] [] 1 [] [] 1 []
• Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie
spillovers or for large amounts of grease on bottom of oven. Wipe up excessive
spillovers.