Startingthe Ovenself-Cleancycle - Electrolux E36GF76HPS1 Use & Care Manual

Care & Cleani
STARTING THE OVENSELF-CLEANCYCLE
I [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
If you are planning to use the oven directly after a self-clean cycle remember to allow time
for the oven to cool down and the oven door to unlock. This normally takes about one
hour. So to self-clean for 3 hours will actually take about 4 hours to complete.
To start a Self=Cleaning cycle:
Be sure oven is empty and the oven door is closed.
Turn the selector knob to Clean position.
The corresponding indicator light will flash.
Turn the Temperature Control Knob to Clean position.
The Lock indicator light will flash while transitioning from unlock to lock. It will stop
flashing when the door is locked.
6. As soon as the controls are set to clean, the motor driven oven door lock will begin to
close automatically. Once the door has been locked the indicator light will stop
flashing and remain on. Allow about 30 seconds for the oven door lock to close.