Connecting The Multi Zone Terminals; Zone2 Speaker Out Connections; Am Loop Antenna Assembly; Connection Of Am Antennas - Denon AVR-686 Operating Instructions Manual

Connecting Other Sources
• AM loop antenna assembly
r
Connect to the AM
antenna terminals
and take out the Bend in the reverse
connection line direction.
@
a Antenna placed on
a stable surface.
Mount
/
b Hanging the
antenna on a wall _ J
/,
Use the
installation hole to secure the antenna to a wall, etc
• J
Note to CATV system installer:
This reminder is previded te call the CATV
system installer's attention to Article 820-40
_f tha NFC whiah provir]ms
gliidalinms
for
proper grounding and, in particular, specifies
that the cable ground shall be cennected to
the greunding system ef the building, as
close to the peint of cable entry as practical.
1. Push the lever.
2. Insert the cenducter.
3. Return the lever.
NOTE:
• Do net connect two FM antennas
simultaneously.
• Fv_n if an _×t_rnal AM antenna is
Hs_r],
d_
net discennect the AM loop antenna.
• Make sure the AM leop antenna lead
terminals de not teuch metal parts of the
panel.
÷ For instructions en operatiens using the MULTI ZONE functions (_ page 35, 36).
14
I ENGLISH
Connecting Other Sources
• When the pewer amplifier is assigned te the ZONE2 output channel at "Power Amp
Assignment", the surround back speaker terminals can be used as the ZONE2 speaker eut
terminals (z:_ _ page 35).
• The connections diagram below is an example for when the surround back speaker is assigned
te the ZONE2 stereo 2 channel.
In this case, surreund back speaker out can not be used fer MAIN ZONE.
Subwoofer
Center Surround speaker
speaker systems
,:_ ii! i!i
F
Front speaker
systems (B)
Front speaker
systems (A)
ZONE2 speaker
systems
NOTE:
• The settings must be
changed to use this
speaker fer ZONE2
(r_ page 43).
I. .................. J