Setting The Test Tone - Denon AVR-686 Operating Instructions Manual

Advanced Setup
l Setting the Test Tone
• use his setting te aujust te mat me DlavDaoK level between tne
different cnanne s eGuo
• From
IRe
signing
OOSlIlOn
sign to me test
tones oreaucea
....... me soeaKers te au ust me leve
• The leve
can also
De au ustecl
direct .
[rum me remote contro
unlI
• Press the CURSOR <1 button to switch the test
tone mode.
• Press the ENTER or CURSOR V button to
switch to the digital input (COAXIAL) setting.
4
Press the
CURSOR <3 or >
button to set the
center channel level, then press the CURSOR V
button to switch to the front R channel level
(manual mode).
Press the CURSOR <3 or > button to set the
front R channel level, then press the CURSOR W
button to switch to the surround R channel level
(manual mode).
' Press the
CURSOR <3
or > button to set the
surround R channel level, then press the
CURSOR W button to switch to the surround
back R channel level (manual mode).
Press the CURSOR <3 or > button to select the 7 Press the CURSOR <3 or > button to set the
test tone mode. then press the CURSOR V / surround back R channel level, then press the
button to start test tone. CURSOR W button to switch to the surround
back L channel level (manual mode).
i::i i i + r'_
7"
= ==_ ..
Auto:
Ad ust me level 'v nile ilstenlrg lo IRe Iest tones eroclucecl
automaTica _ from the different speaKers.
Manual:
Select the sueaker from which ou warn TOorocluce tne test
tone to acl ust The leVel.
3
Press the
CURSOR <]
or D button to set the
front L channel level then press the CURSOR V
button to switch to the center channel level
(manual mode).
L
:_.. = :] i:::=_ _':._ = ::'" _ ""
Press the
CURSOR <3
or > button to set the
surround back L channel level, then press the
CURSOR V button to switch to the surround L
channel level (manual mode).
Press the
CURSOR
<] or D button to set the
surround L channel level, then press the
CURSOR V button to switch to the subwoofer
channel level (manual mode).
It Press the
CURSOR <3 or >
button to set the
V subwoofer channel level, then press the ENTER
button to finish the test tone.
I€ Press the ENTER or CURSOR V button to switch
/ the Digital In Assignment (COAXIAL) setting.
Advanced Setup
• When adjusting me evel of
ar active SUDWOOTer
system, veu
ma_. also
neecl t
acljust the subwoofer's own vemme cent
• When vou aclust IRe cnanne
levels
Wnlle "
me system
seIUD
channel
eve mode me
cnanne evel ao ustments _acle
rv
affect a surround meues 3onsider his mode • master
cnannel evel
aausmhenlmoae
• After nave coR-olelecl ine s\sieR- selu[_ 3nannel eve
acljustments ._ can inen activate u]e ]cllVlclua surround
mocles and aujust cnanne
level. < ulat A/Ill
De rememDerecl
TOr
each of those medes
mher
whenever . ou activate a eamoular
surreunc sound mocl÷ your :)rererrec cnanne eve
aujustments for lust mat mecle m
De recalleu
Check IRe
nstructlons for acljustlng :nanne levels /Vlmln eacn surround
mocle _m page 28)
• Adjusting the test tone
• Befere playlnc Wli ine surreunu TuncIK)r De sure IO use tne
test tones to adjust me DlaVDaC evel
TreR tne
differenl
speakers
This
acll Jstment can De
eerformed with the
s_ 5ten _
sett Dor frem the remete comrol unll as
clesorlDecl below.
• Ac Ustlng wltr tne remote comrc unli using tne test tone.< is
onlv OOSSlDle "
IRe Auto
mecle
and onl. effective
me
STANDARD DOLBY/DTS SURROUND moues The auusteQ
evels _
IRe different moues are
automatlca . sterecl -
IRe
memoFv
Press the STANDARD button to select the
STANDARD (DOLBY/DTS SURROUND)
modes.
Press the
TEST TONE
button.
• Test tones are OUlDUt f rom the different speakers
Press the CURSOR <3 or D button to adjust so
that the volume of the test tones is the same for
all the speakers.
After completing the adjustment, press the
TEST TONE
button
again.
41
L
ENGLISH
J