Setting Oven Controls - Kenmore 790.9010 Series Use & Care Manual

Electric range
Hide thumbs Also See for 790.9010 Series:
Table of Contents

Advertisement

Setting Oven
Controls
FEATURE
OVERVIEW
Bake
Timed Bake
o
o
®
o
O
O
OVEN
PREHEAT
9D
DOOR LOCKED
Setting
Bake
The oven can be programmed to bake at any temperature from t 70°F (77°C) to 550°F (288°C).
INSTRUCTIONS
PRESS
To Set or Change
the Temperature
for Normal
Baking
1. Push
BAKE • '....
and the word "BAKE" will be displayed.
8A_E
2. Push the/_
or v.
The display will show "350°F"(177°C). By holding the/_
/% or v
or v
the temperature can then be adjusted in 5°F (3°C) increments.
3. As soon as the/_
or v
is released, the oven will begin heating and the
/_ or v
"OVEN" and the "PREHEAT" lights will come on. When the displayed
temperature is reached, the control will beep 3 times and the "PREHEAT"
light will go out; the oven signal light will cycle on and off with the element.
4. To cancel the baking function, push _.
To change the temperature
after normal baking/roasting
has begun, repeat
steps 1 and 2 above.
DISPLAY
:Z
iii .........
..... iH .....
Setting
Timed
Bake
The @
pad controls the Timed Bake feature. The automatic timer of the Timed Bake feature will turn the oven OFF
v
after cooking for the desired amount of time you selected.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven to begin
baking
immediately
and to shut
off automatically:
t. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Push _.
"0:00" will flash in the display.
@
4. Push the/_
or v
until the desired baking time appears in the display.
/_ or v
5. Push B_.
%E
6. Within 5 seconds, push the/_
or v.
The display will show "350°F (177°C). ''
/_ or v
By holding the/_
or v,
the temperature can then be adjusted in 5°F or 1°C
/_ or v
increments.
Once the Controls are Set:
1. The oven will come on and begin heating to the selected baking temperature.
2. The oven temperature will show in the display.
E
m
m
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.9015 series

Table of Contents