Advertisement
Available languages
Available languages
HOW TO START
1 ou,o
Release
Hook
1. Turn the
quick release
cord hook to
either side and
down to
release the
power cord+
2, Release the power cord plug from the
power cord and pull the cord off the quick
release cord hook. Check to be sure the
power cord is still locked into the locking
notch in the quick release cord hook
3. Check to see if the cleaner has bag
installed.
See DUST BAG CHANGING.
WARNING
Personal Injury and Product
Damage
Hazard
• DO NOT plug in if switch is in the
ON position.
Personal injury or dam-
age could result.
• DO NOT use outlets above coun-
ters. Damage to items in surrounding
area could occur.
NOTE: To reduce the risk of electric shock,
this vacuum
cleaner has a polarized plug,
one blade is wider than the other_ This plug
will fit in a polarized
outlet only one way+ If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified technician
to install the prop-
er outleL Do not change the plug in any
way+
4, Plug the polarized
power cord into a 120
Volt outlet located near the floor,
To release the handle, place your foot on
the foot step for handle release and pull
back on the handle until it releases from its
upright position°
Raising the handle up will
catch the handle support spring and hold
the handle in the upright position.
Foot Step For
Handle Release
With your left hand reach down and push
the On/Off switch to the right. The cleaner
will now start
To shut the cleaner off, reach
down and push the switch to the left.
Advertisement
