Kenmore 116.31079 Owner's Manual page 12

. WAR.INa
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
Frequently check and remove hair, string
and lint build-up in the brush area. If build-
up becomes excessive, follow the steps
below. Should the belt become loose or
should it break, follow the Belt Removal
Instructions.
TO REMOVE LOWER PLATE:
Disconnect electrical supply.
The handle must be lowered and the cleaner
turned over°
To protect the floor surface, always place
paper under the nozzle any time the nozzle
cover is removed.
Release the lower plate by pushing the tabs
in toward the center.
Grasp the clips at the back and pu]l forward
and up to remove the lower plate.
Brush or remove any residue that may exist
in the belt area.
clips
• wARNING
Personal Injury Hazard
Always unplug the vacuum cleaner
before cleaning the brush area as
agitator may suddenly restart,
Failure to do so can result in per-
sonal injury.
12