JVC AV-65WP94 User Manual page 77

There is no power * See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture * The antenna could be disconnected.
or sound * The input mode could be set improperly. See page 61.
• The tuner (Auto Tuner Setup) could be set improperly. See page 33.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not * Check to see that the batteries are still working and properly installed.
operating properly or * Make sure the remote has a clear sight path to the TV.
at all * Check that the TV/CATV switch is in the proper position.
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a * Make sure the channels have been programmed. See "Channel Summary", page 33.
certain channel * Check to see if the channel is locked. See "Channel Summary - Lock" page 34.
The power turns off * Make sure the set did not become unplugged.
by itself * Perhaps the On/Off Timer is set. See page 58.
• Check to see if the Sleep Timer was set. See page 63.
The clock is wrong * The power was interrupted and the clock was not reset. See page 57.
The color quality * Tint and Color may be improperly adjusted. See page 52.
is poor * The Video Status mode may be turned to the wrong setting. See page 63.
There are lines * There could be interference from another electrical appliance, such as a computer,
across the picture another TV or VCR. Move any such appliances further away from the TV.
The picture is spotted * There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
There are double * A building or passing airplane can reflect the original signal and produce a second,
pictures (ghosts) slightly delayed one. Adjust your antenna position.
Picture is snowy * Your antenna may be damaged, disconnected or turned. Check the antenna
(image noise) connection. If the antenna is damaged, replace it.
Screen is 40% black * The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 44.
Stereo or bilingual * Make sure the MTS settings are correct. See "ML/MTS" on page 66.
programs can't be
heard
There is no sound * The Center CH Input may be turned on. See page 50.
from the TV's
speaker
Static electricity * It is normal to feel static electricity if you brush or touch the screen.
You hear occasional * It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds the sound or picture become abnormal, this is fine.
The AUTO DEMO * The TV recieved a signal from the AV CompuLink
finished automatically * The On Timer that you programmed has started.
• The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.
• The Auto Shut Off that you programed has occured.
ili