JVC AV-65WP94 User Manual page 41

This TV has three color projection tubes: one for red, green, and blue. When mixed together in
the proper portions, the output of these three color tubes can produce any color. To produce
these colors, however, the beams must be precisely aligned over each other so that the colors
can be mixed. The process of aligning these picture beams is called "convergence".
Attention:
• Please have your TV on for at least 20 minutes before using this feature.
• This adjustment will be needed only when the colors of the characters/lines are separated
and lack in distinction. If not, please don't perform the adjustment.
Colors may become separated after the TV has been moved, or
over a long period of time if regularly subjected to low levels of
vibrations. If the colors become separated, please perform the
adjustments below again, in the beginning, please be sure to
perform AUTO convergence adjustment.
AY
4_
AV
Note:
Press the MENUbutton
To CONVERGENCE
To Enter
To select "AUTO" (The convergence adjustment wil! start.
It will take about 50 seconds).
When the adjustment is finished, it will return to what you
were watching.
VAUTO
MANUAL _ Ip
RESET
• You can reset the adjustment if you do not like the results. See the next page.
• If you want to adjust it more, you can perform the manual color convergence adjustment. See
the next page.
• You can also access this feature by pressing the SUPER Focus button on the front panel of
your TV.
OPEN
SUPER
MENU = VOLUME + FOOUS
It="=='= 4 OPERATE _
SUPER
FOCUS
D
II!