Advertisement
Operating
Instructions
(continued)
3. After a few days when the Relative Humidity has declined, press the HUMIDITY A or V buttons to choose a value
between 35% to 85%, so the room is kept at a comfortable humidity. Pressing the A or V buttons will change the
humidity selection in 5% increments. After you have set the desired humidity, the readout will display the actual
room humidity. If at any time you want to return to the CONTINUOUS Mode, pressing the HUMIDITY
V
button
will lower the Relative Humidity through the 5% increments until the display reads CO.
l 'I
hi l
to
=an fitter
fi It er
fan
reset
speed
k__
humidity
setting
RH%
V
A
timer
ON-OFF
L humidity J
J
4. You can also use the FAN SPEED button to change the fan speed to HIGH or LOW. The indicator light will show the
setting you have selected. A higher fan speed will result in quicker moisture removal.
f
_
'l
hi
lo
£_lean
filter
filter
fan
reset
speed
k_
humidity
setting
RH%
v
A
L humidity J
timer
ON-OFF
J
5. The CLEAN FILTER light will illuminate after 250 hours of operation. At this time refer to the care and cleaning
section to remove and clean the filter. Once the filter has been cleaned and replaced, simply press the FILTER button
to extinguish the light.
filter
fan
reset
speed
humidity
setting
RH%
v
A
L humidity J
timer
ON-OFF
J
@2009 Electrolux Home Products, Inc.
All rights reserved,
r-
Advertisement
