Operation Mode - JVC GR-D250 Instructions Manual

Llsing A CPower
_erforrn step 4 in "Charging The Battery Pack".
NOTE:
]-he provided AC Adapter features automatic
Joltage selection in the AC range from 110 V to
240 V.
_boutBatteries
[:)ANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive
meat, as it may cause a fire or explosion.
_NARNING! Do net allow the battery or its
:erminals to come in contact with metals, as this
_an result in a short circuit and possibly start a
:ire.
ro resume the original function of the
accurate battery power indication
f the battery power indication differs from the
actual operating time, fully charge the battery,
and then run it down. However this function may
met turn back if the battery was used for a long
3eriad of time under extremely high/low
:emperature condition or charged too many
:imes.
II OperationMode
To turn on the camcorder, set the Power SwJtch
to any operation mode except "OFF" while
pressing down the Lock Button located on the
switch.
MENU/DATA Power Switch
Lock Button
POWER/
CHARGE lamp €/
_=
i,-
Choose the appropriate operation mode u,
according to your preference using the Power
Switch.
Power Switch Position
[] (Full Auto Recording):
Allows you to record using NO special effects
or manual adjustments. Suitable for standard
recording.
The '_" indicator appears on the display.
[] (Manual Recording):
Allows you to set various recording functions
using the Menus. ( pg. 22)
If you want more creative capabilities than Full
Auto Recording, try this mode.
OFF:
Allows you to switch off the camcorder.
PLAY:
• Allows you to play back a recording on the
tape,
• Allows you to set various playback functions
using the Menus. ( pg. 22)