Table of Contents
Advertisement
REHOVING
AND REPLACING
THE LIFT-
OFF OVEN
DOOR
The door is heavy. For safe, temporary storage, lay the
door fiat with the inside of the door facing down.
Most oven doors contain glass that can break.
Read the following recommendations:
1.
2.
3. Scratching, hitting, jarring or stressing the glass
may weaken its structure causing an increased risk
of breakage at a later time.
Do not close the oven door until all the oven racks
are fully in place.
Do not hit the glass with pots, pans, or any other
object.
To Remove Oven Door:
1.
Open oven door completely (horizontal with floor -
See Figure 1).
.
Door Hinge locations with
oven door fully open
Figure 1
Pull the door hinge locks on both left and right
door hinges down from the oven frame completely
towards the oven door (See Figure 2). A tool such as
a small fiabblade screwdriver may be required.
Figure 2
,
Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
1
Oven door
I
Around
Hinge
Figure 3
/
/
4.
Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5.
With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Figure 4).
Figure 4
To Replace Oven Door:
1.
Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
2.
Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Figure 4). The hook of the hinge arms
must be fully seated onto the roller pins.
3.
Fully open the oven door (horizontal with floor - See
Figure 1).
4.
Push the door hinge locks up towards and into the
oven frame on both left and right oven door hinges
(See Figure 2) to the locked position.
5.
Close the oven door.
Advertisement
Table of Contents
