Advertisement
Rotisserie
Lighting
Open the lid. Push and turn the control knob counter
clockwise
to the "H1Gtt" position.
Wait 5 seconds.
Then press and hold the electronic
ignitor button.
You'll hear a snapping
sound. If the burner does not
light in 4 seconds, turn the control knob to OFF and
wait 5 minutes before trying again. Once lit, turn the
control knob to the desired setting.
(See Fig. 16)
(If the ignitor does not function, the burner can be lit
by holding a lit match to the burner while the control
knob is turned counter clockwise
to "ttlGtt".)
(See Fig. 17)
NOTE:
After the first use the stainless
steel around
the burner
will darken.
This is a normal
occurrence
of the non-rusting,
type 304
stainless
steel
used on the grill.
The infrared
panel
will also darken
after initial
use.
This is
a normal
occurrence.
Side Burner
Lighting
Push and turn the control
knob to the "ttlGtt"position
and
immediately
press and hold the electronic
ignitor button.
You'll hear a snapping
sound.
It may be necessary
to hold
the electronic
starter button for about 4 seconds.
If the
burner does not light in 4 seconds, turn the knob to the
"OFF" position
and wait 5 minutes
before trying again.
Repeat above steps to light remaining
burners.
(See Fig. 18)
Match
Lighting
If by chance the electronic
ignitor does not light the
burner, the burner may be lit with a match.
Keep your
face as far away from the burner as possible
and place a
lit, long stem match through
the spaces in the grate to the
ports of the burner.
Position
the match near the burner
ports and push and turn the control knob to the
"ttlGH'position.
Fig. 16
Fig. 17
15
Fig.
18
Advertisement
