Jenn-Air Expressions W27400 Use And Care Manual page 33

Control Panel Area and Display Window
Wipe with soft cloth dampened with soapy water or glass cleaner. Do not spray any
cleaning solutions directly onto the display window or use large amounts of soap and
water. Do not scrub with S.O.S, pads or abrasive cleaners.
Stainless Steel (select
models)
Do not use any cleaning product containing chlorine bleach.
Always wipe with the grain when cleaning.
Daily Cleaning/Light Soil - Wipe with one of the following - soapy water, white vinegad
water solution, Formula 409 Glass and Surface Cleaner or a similar multi-surface cleaner
- using a sponge or soft cloth. Rinse and dry. To polish and help prevent fingerprints,
follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No. 20000008).
Moderate/Heavy Soil - Wipe with one of the following - Bon Am! or Soft Scrub - using
a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp
Scotch-Brite pad; rub evenly with the grain. Rinse and dry. To restore luster and remove
streaks, follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No.
20000008).
Discoloration - Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel
Cleaner. Rinse immediately and dry. To remove streaks and restore luster, follow with
Stainless Steel Magic Spray (Jenn-Air Model A912, Part No, 20000008).
To remove pul! forward to the "stop" position; lift up
on the front of the rack and pull out.
Before replacing bulb, disconnect power to oven at the main fuse or circuit breaker panet.
Be sure that the entire oven cavity including the light bulb is cool before attempting to
remove.
To replace light bulb
1. Carefully unscrew the glass light lens.
2. To obtain firm grasp on the bulb, wear protective rubber
gloves. Remove by turning bulb to the left. Do not touch a hot
oven light bulb with a damp cloth as bulb will break. Note: If
the bulb does break and you wish to remove it, be certain
power supply is disconnected and wear protective gloves.
You may contact you r authorized Jenn-Air Service Contractor
for service.
3. Replace bulb with a 40 watt oven-rated appliance bulb, Bulb
with brass base is recommended to prevent fusing of bulb into
socket.
4. Replace bulb cover and reconnect power to oven. Reset
clock.
33