Assembly - LIFESTYLER Cardio Fit Owner's Manual

BEFORE YOU BEGIN
Thank you for selecting the innovative SEARS _
CARDIO FIT. The CARDIO FIT offers a unique form of
low-impact exercise that uses both the upper body and
lower body for increased cardiovascular benefits and
greater toning results.
For your safety and benefit, read this manual
carefully before using the CARDIO FIT. If you have
additional questions, please call our Customer Service
Department toll-free at 1-800-736-6879, Monday
through Saturday, 7 a.m. until 7 p.m. Central Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
when calling. The model number is 831.287622. The
serial number can be found on a decal attached to the
CARDIO FIT (see the front cover of this manual for the
location of the decal).
ASSEMBLY
Place all parts of the CARDIO FIT in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning.
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: the included pedal tool (see the drawing
below), and your own phillips screwdriver -----.--(Z_), adjustable wrench _:;;;;;;_, and rubber
mallet _.
PARTCHART
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part. The second number refers to the quantity used in assembly.
1/2" Dome Cap (29)4
#8 x 1/2" Screw (16)--5
1/2" Bushing (25)--2
@
1/2" Push Nut (30)--2
3/8" Spacer (20)--2
Q
3/4" x 1" Pedal Tool--1
3