Selecting Cycle Options; Changing A Cycle Setting; Changing An Option Setting; Hi-Temp Wash - Inglis series 355 Use & Care Manual

If desired, p ressoneor moreOptionpads.
Youcanpressan Optionpadafterthedish-
washer s tartsas longas thecyclehasnot
passed thepointthattheoption is used. F or
example, youcanpress Air Dryanytime
before theCycle Control k nobreaches Dry.
Hi-Te_p Wash
When Hi-Temp Wash is selected, the dish-
washer heats the water during the
main wash of the Light and Normal
cycles. Heating the water helps
improve washing results. The
Pots-N-Pans cycle automatically
uses Hi-Temp Wash.
NOTE: The Cycle Control knob does not
move while water is being heated. Once the
water reaches the proper temperature, the
Cycle Control knob will begin moving again.
Air Dry
When Air Dry is selected, the air in the
M ishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid
rinse agent.
NOTES:
,, The dishwasher automatically heats the air
in the dishwasher during the "dry" portion
of the cycle unless you select Air Dry.
,, Always select the Air Dry option when
using the Rinse - Wash Later cycle.
You can change a cycle setting anytime
during any cycle.
1. Lift up the door latch to stop the cycle.
2. Turn the Cycle Control knob clockwise to
the desired cycle.
3. If desired, press one or more Option pads.
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
NOTE: Turning the Cycle Control knob
can cause the covered section of the
detergent dispenser to open and release
the detergent. Check the covered section
if setting a cycle,
5. Close the door firmly until it latches, The
dishwasher starts the new cycle,
You can change option settings anytime
during a cycle as long as the
cycle has not passed the point
that the option is used. For
example, you can press Air Dry
anytime before the Cycle Control
knob reaches Dry.
1. Press the Reset pad.
2. Press 1 or more Option pads.
15