Setting The Controls; Selecting A Wash Cycle - Inglis series 355 Use & Care Manual

Settin the Controls
Press a Cycle pad. (Normal wash, Light wash and Rinse - Wash Later share the same pad.)
Turn the Cycle Control knob to the desired cycle.
CYCLE
POTS-N-PANS
Double heated
washes for cleaning
of cooked-on or
baked-on foods.
• The water heats to 140°F (60°C) in
both washes.
• The water heats to 140°F (60°C) in
the final rinse.
NORMAL
Double wash for
normal, everyday
soiled loads. (The
EnerGuide label is
based on this cycle.)
• Select Hi-Temp Wash to heat water
to 140°F (60°C) in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
LIGHT
• Select Hi-Temp Wash to heat water
to 140°F (60°C) in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
A "," shows what each cycle includes
MAIN
WASH
RINSE WASH RINSE
• o •
• •
Single wash for
pre-rinsed or lightly
soiled loads.
DRY
CYCLE
TIME
(Minutes)
88t
72t
621-
1 Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown The Cycle Control knob does
not move while water is being heated
13