Cutting Height Adjuster; Fuel Shut Off Valve - Husqvarna MZ28ZTBF Operator's Manual

CONTROLS
Cutting Height Adjuster
The desired cutting height is set with the height pin
The cutting height pedal releases the deck lift to place
the deck and the selected height.
For transport, push the lift pedal fully forward until the
deck lifl latches in the transport (highest) position..
Seat Adjustment Lever
The seat can be adjusted lengthways.. When making
adjustments, the lever under the front edge of the
seat is moved to the left (as seen by the driver in the
seat), after which the seat can be moved backward or
forward
Fuel Shut Off Valve
The fuel shut off valve is centered behind the rear
of the seal The valve is off when the handle tab is
turned perpendicular to the fuel line
1, Release pedal
2 Height pin
Cut height selection pedals
\
Lengthways adjustment
8055*O 17
8011-44t
22
Fuel shut off valve in the CLOSED position_
8055-010