Controls; Control Locations - Husqvarna MZ28ZTBF Operator's Manual

CONTROLS
This operator's manual describes the Husqvarna Zero
Turn Rider The rider is fitted with a Briggs & Stratton
four-stroke overhead valve engine developing 28
horse power*
Control Locations
Transmission from the engine is made via beltodriven
hydraulic pumps Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed,,
®
13
12
!0
11
1. Motion control tevers 6 ignition switch
2. Parking brake 7, Hour meter
3 Tracking knob 8 Throttle control
4, Fuettank 9 Blade switch
5. Hydro release levers
10, Seat adjustment lever
1t Right tracking bolt
12, Height adjustment
13, Deck lift
"The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine
for the engine model measured to SAE standard J1349/IS01585, Mass production engines may differ from this value, Actual
power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and
other variables,
17