Fuel Shut Off Valve; Cutting Height Adjuster; Seat Adjustment Lever - Husqvarna EZ24T CE Operator's Manual

Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the
seat. The valve is off when the handle tab is turned
perpendicular to the fuel line.
IMPORTANT INFORMATION
Always raise the deck to the highest position
for transport.

Cutting Height Adjuster

To set the desired deck cutting height, press the
release button and move the lever forward to the
correct cutting height on the cutting plate. The cutting
height range is from 1½" (38mm) to 4" (102mm) in ½"
(13mm) increments. The heights are measured from
the ground up to the blade tip with the engine not
running.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is
important that the air pressure in all tires is 15
psi / 103 kPa / 1 bar.

Seat Adjustment Lever

The seat can be adjusted lengthways. When making
adjustments, the lever under the right front side of the
seat is pulled to the side, after which the seat can be
moved backward or forward.
22
CONTROLS
Fuel shut off valve in the CLOSED position
The mower deck's lifting lever
Lengthways adjustment
8011-419
8058-019
8061-228