Fuel Shut Off Valve; Cutting Height Adjuster - Husqvarna RZ4621 CA Operator's Manual

Fuel Shut Off Valve

the fuel shut off valve is located at the left rear of the
seat. the valve is off when the handle tab is turned
perpendicular to the fuel line.
IMPORTANT INFORMATION
Always raise the deck to the highest position
for transport.

Cutting Height Adjuster

to set the desired deck cutting height, press the
release button and move the lever forward to the
correct cutting height on the cutting plate. the cutting
height range is from 1½" (38mm) to 4" (102mm) in ½"
(13mm) increments. the heights are measured from
the ground up to the blade tip with the engine not
running.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is
important that the air pressure in all tires is 15
psi / 103 kPa / 1 bar.
22
COntROlS
Fuel shut off valve in the CLOSED position
The mower deck's lifting lever
8011-419
8058-019