Seat Adjustment Lever; Hour Meter; Tracking Knob - Husqvarna MZ5425S Operator's Manual

CONTROLS
Seat Adjustment Lever
The seat can be adjusted lengthways. When making
adjustments, the lever under the front edge of the
seat is moved to the left (as seen by the driver in the
seat), after which the seat can be moved backward or
forward.
\
Fuses
Fuses are located on the left hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
There are two fuses with ratings and functions:
1. 20 A, Primary fuse
2. 7.5 A, Mower deck coupling
Lengthways adjustment
8011-441
Fuses
8050-082
Tracking Knob
If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 10 psi. (.7 bar) for the front tires and 15 psi
(1 bar) for the rear tires. Tracking must be checked on
a flat and level concrete or blacktop surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
When in the operating position, rotate the knob out to
loosen and increase the speed on the left lever. Rotate
in to tighten and decrease speed.
Tracking knob
8058-210
23