Ignition Switch; Choke Control; Fuses - Husqvarna MZ5425S Operator's Manual

CONTROLS
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
Turn the key clockwise to start the engine.
Ignition switch
8058-145
Choke Control
The choke control is used for cold starts in to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent. Push the choke in once the engine starts.
Choke control
8058-145
Hour Meter
The hour meter displays the total operating time with
the blade activated.
The display on the hour meter will turn on the oil can
icon after every fifty hours of use and will stay on
for two hours or until the meter is manually reset. To
manually reset the timer, turn the ignition key to the
run position. Engage and disengage the blade switch
five times at one second intervals.
2O
Hour meter
8058-145