Key To Symbols; Symbols - Husqvarna 125E Operator's Manual

KEY TO SYMBOLS
Symbols
WARNING: This edger can be
dangerous! Careless or incorrect
.Z_K
use can result in serious or fatal
injury to the operator or others.
Please read the operator's manual
carefully and make sure you r[]I ri-]
understand the instructions
before using the machine.
Always wear: _)
• A protective helmet where there
is a risk of falling objects
• Hearing protection
• Approved
eye protection
Max. speed of output shaft, rpm
msx
10000 rpm
Watch out for thrown objects
and ricochets.
Warning for rotating blade.
Keep hands and feet clear.
WARNING: The blade continues to A
rotate even after the engine has _.=_,
stopped. /_{_
When the engine has stopped, m
stop the blade from rotating
by tetting the blade come in
contact with the ground.
Indicates the direction of rotation.
The operator of the machine must ensure
that no persons or animals comes within a
50 feet (t5 meters) radius while working.
[t .4;1
mAk
Arrows which show limits for _l_4P,
handle positioning.
'V|
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
Stop the engine by pushing
and holding the stop switch
in the STOP position until the
engine stops before carrying
out any checks or maintenance.
Regular cleaning is required.
Visual check.
Approved eye protection must
always be used.