Husqvarna 125E Operator's Manual page 23

U.S. EPA/CALIFORNIA/ENVIRONMENT CANADA
EMISSION CONTROL WARRANTY STATEMENT
MAINTENANCE, REPLACEMENT
AND REPAIR OF EMISSION RE-
LATED PARTS:
Any HUSQVARNA approved replacement
part used in the performance of any warran-
ty maintenance or repair on emission re-
lated parts will be provided without charge
to the owner if the part is under warranty.
EMISSION CONTROL WARRANTY
PARTS LIST:
Carburetor, Ignition System: Spark Plug
(covered up to maintenance schedule), Igni-
tion Module, Muffler including Catalyst.
MAINTENANCE STATEMENT:
The owner is responsible for the perfor-
mance of all required maintenance as de-
fined in the operator's manual.
This engine is certified to be emissions compliant for the following use:
[] Moderate (50 hours)
[] Intermediate (125 hours)
[] Extended (300 hours)
DECLARATION OF CONFORMITY
relating to 2000/14/EC
EC Declaration of Conformity relating to 2000/14/E0
We, Electrolux Home Products, Inc., Texarkana, TX, 75501, USA, Tel, : +1 903 223
4100, declare under sole responsibility that the Husqvarna model 125E edger was
assessed in accordance with Annex V of the DIRECTIVE and from serial numbers
2006-096N00001 and onwards, conforms to the provisions of the DIRECTIVE. The
cutting width is 431 mm. The measured sound power is 109 dB and the guaranteed sound
power is 114 dB.
Texarkana 06-04-06
Michael S. Bounds, Director
Product Safety and Standards
DECLARATION OF CONFORMITY
relating to 98/37/EC
EC Declaration of Conformity (Directive 98/37/EC, Annex il, A) (Only applies to
Europe)
We, Electrolux Home Products, Inc., Texarkana, TX, 75501, USA, Tel. : +1 903 223
4100, declare under sole responsibility that the H usqvarna model 125E edger from serial
numbers 2006-096N00001 and onwards, follows the provisions of the DIRECTIVES :
98/37/E0 (machinery) and 89/886/EE0 (electromagnetic compatibility), including
amendments and is in conformity with the following standards: ISO 11789:1999, EN ISO
12100-2 et CISPR 12.
SMP, The Swedish Machinery Testing Institute, Pyrisborgsgatan 3 S-754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SE0/06/1118.
• oo00
Michael S. Bounds, Director
Product Safety and Standards
23