Table of Contents
Advertisement
3. Remove the water-resistant seal carefully.
4. Wipe off foreign matter (sand, dust, etc.) from the grooves in the case.
5. Thinly coat the entire water-resistant seal with grease (provided).
6. Fit the water-resistant seal into the grooves in the case with its sharp edge forward.
NOTE:Do not push the seal
in with tweezers or a Sharp object. If the Water'resistant
seal is
damaged,
it will allow Wate[ to enter.
7. Re-connect
the power connector
and re-attach
the bracket in their original positions.
Storage
• Store the VM-SPIA
in a well ventilated
place, not in a place at high temperature
and
high humidity
or in a dusty place.
• Thinly coat the water-resistant
seal with grease (provided)
to prevent
it from
deteriorating
and store the VM-SPIA
without closing the buckle and with the case
slightly open.
Advertisement
Table of Contents
