Hitachi Ultravision L42S601 Operating Manual page 9

Most video/audio connections between components canbemade w ithshielded video and audio c ables thathave
phone c onnectors. For b est p erformance, video cables s hould u se75-Ohm c oaxial shielded wire. C ables canbe
purchased frommoststores thatsellaudio/video products. Below areillustrations andnames o f common
connectors. Before purchasing anycables, besureoftheoutput a ndinput c onnector types required bythe
various components and thelength o feach cable.
300-Ohm Twin Lead Cable
This outdoor antenna cable must be connected to an
antenna adapter (300-Ohm to 75-Ohm).
Phone or RCA Cable
Used on all standard video and audio cables which
connect to inputs and outputs located on the
television's rear jack panel and side control panel.
@
"F" Type 75-Ohm Coaxial Antenna
For connecting RF signals (antenna or cable TV) to the
antenna jack on the television.
S-Video (Super Video) Cable
This connector is used on camcorders, VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture.
Optical Cable
This cable is used to connect to an audio amplifier with
an Optical Audio In jack. Use this cable for the best
sound quality.
HDMI Cable
This cable is used to connect your external devices
such as Set-Top-Boxes or DVD players equipped with
an HDMI output connection to the TV's HDMI input.
®
Stereo Cable (3.8mm plug to 3.5mm plug)
Used on all standard video and audio cable which
connect to inputs and outputs located on the rear jack
panel and side control panel.
38ram 2
STEREO RCATYpE
M[N_PLUG PLUGS
Power Swivel Cable (Provided)
This cable is used to connect the swivel stand to the
rear panel of the LCD Television.