Hitachi Ultravision L42S601 Operating Manual page 30

OPERATING THE PRECODED FUNCTION FOR
YOUR VCR/PVR (Personal Video Recorder).
This remote is designed to operate different types of
VCRs/PVRs. You must first program the remote to
match the remote system of your VCR/PVR (refer to
pages 32-33 for pre-codes).
1.
2.
Turn ON your VCR/PVR.
To switch to VCR/PVR pre-coded mode, use the
SOURCE SELECT button on the remote control to
position the LED light to the corresponding
selection PVR/VCR.
Hold down the SOURCE SELECT button on the
remote and enter the four digit preset code that
matches your VCPJPVR, as shown on pages 32-33.
Release the SOURCE SELECT button. The indicator
light will flash 3 times if the code was accepted.
Aim the remote at the VCR/PVR and press the
POWER button. The remote will turn off your PVR
when the correct four digit preset code is entered.
When this occurs, the remote control is
programmed for your VCR/PVR. If the VCR/PVR
does not turn off, try a different four digit preset
code.
5. The remote will now control your VCR/PVR.
SOURCESELECT
PVR SAT/ Q
DVD VCR CBL
I
HITACHI
@
@
@
PRECODED VCR/PVR Buttons
These buttons transmit the chosen precoded
VCR/PVR codes :
-Power -Cursor & Select -Enter
-Menu -Channel Up & Down -Dash (-)
-Exit -Number PAD -Play, Pause, Stop
-Info -Last CH -FWD, Skip FWD
-Record -RWD
EXCLUSIVE TV Buttons
These buttons are for operating the TV :
-Day/Night -CC
-Aspect -Vol Up & Down
-ANT -Mute
-Inputs (only if
programmed,
refer to page 31)
MY VCR/PVR CODE IS:
3O