Hitachi Ultravision L42S601 Operating Manual page 17
Lcd flat panel television
Hide thumbs
Also See for Ultravision L42S601:
- Operating manual (142 pages) ,
- Service manual (91 pages)
Advertisement
•
S-VIDEO,
Y-PBPR, or HDMI connections
are provided
for high performance
laserdisc
players,
VCRs etc. that
have this feature.
Use these
connections
in place of the standard
video
connection
if your device
has this
feature.
•
If your device
has only one audio
output
(mono
sound),
connect
it to the left audio jack
on (L/(MONO))
the
Rear Panel.
•
Refer to the operating
guide
of your other
electronic
equipment
for additional
information
on connecting
your hook-up
cables.
•
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot
record
its own video or line
output
(INPUT:
1 in the example
on page 16).
Refer to your VCR operating
guide for more information
on
line input-output
connections.
•
Connect
only 1 component
(VCR, DVD player, camcorder,
etc.) to each input jack.
•
COMPONENT:
Y-PBPR (Input 2 & 3) connections
are provided
for high performance
components,
such as
DVD players
and set-top-boxes.
Use
these
connections
in place of the standard
video
connection
if your
device
has this feature.
•
Your component
outputs
may be labeled
Y, B-Y, and R-Y. In this case,
connect
the components
B-Y
output
to the TV's PB input and the components
R-Y output
to the TV's PR input.
•
Your component
outputs
may be labeled
Y-CBC R. In this case, connect
the components
C B output
to the
TV's PB input and the components
C R output
to the TV's PR input.
•
It may be necessary
to adjust TINT to obtain
optimum
picture
quality
when using the Y-PBPR
inputs.
(See
page 36).
•
To ensure no copyright
infringement,
the MONITOR
OUT output
will be abnormal,
when using the Y-PBPR and
HDMI input jacks.
•
Input HDMI 1, HDMI 2 or HDMI FRONT
can accept
HDMI signal.
•
S-VIDEO
monitor
output
may be used for recording
only when the input is of S-VIDEO
type.
•
When
using a HDMI input from a Set-Top-Box,
it is recommended
to use a 1080p,
1080i or 720p input signal.
•
When HDMI input a 1080p signal, it is recommended
that the length of the cable be less than 5 meters.
17
Advertisement
