RepJadng t he LightBulb(fig.3}
When replacing the light b db,fallow the steps below:
1_ Unplug the freezen
2.Remove
the plastic l ight s hade l ocated inside t he
freezer bylightly p ressing totheJeff side.
(see f ig_ 3)
3.Remove
the light b ulb by" t urning i t
counter-clockwise.
fig_ 3
4_Use ONLY appliance light b ulb with25-watts ofpowen
5. installa new replacementlight bulb by turning it clockwise.
& Replacethe light shade to its original position.
7. Turnthe freezer power ON to seeif you have installed the light bulb correctly'.
8_ Hf t he light bulb does not turn ON, repeat the stepsabove.
Freezer
interior
Shrives
(fig. 4)
Theshelvesof the freezer were designedwith you in mind. Their adiustabiJityin
position allows you to personalizethe storage space to your specific needs.
Toremoveor adjust a fuji-width, dide-out shelf:
1. Gently tilt the shdf up and dide it towardsyou until the shelf has been compJetdy
removed_ (see fig_4)
2. To replacethe shdf, selectthe desired settingand gently dide the shdf back until
it restsin the locking position.
blote: AJJ shrivesare not adjustable.
fig. 4
i _s _i