Troubleshooting - Haier HDP18PA User Manual

Dishwasher does not work:
• Check if the unit is plugged in, The plug may have come loose.
• Check if the electrical wall receptacle is of proper voltage,
• Check if circuit breaker needs to be reset or if the fuse needs to be replaced,
• Check if the unit is on "Off" mode.
• Check if the door is open, You may have to close the door properly.
Dishware and glassware/flatware are cloudy
and not cleaned:
• Use of old or poor detergent.
You need to make sure that detergent is fresh,
• The water may be hard in your area,
You may need to install water softener.
• Spray arms may be blocked,
You may need to rearrange dishware and utensils.
• Water pressure may be low,
You may need to adjust the water pressure,
Make sure it is between 20 to 120 (PSI).
• Water temperature may be lower than what is recommended.
(120 Degree F / 49 Degree C) You may need to adjust water regulator.
• Overloading of dishware.
You may need to rearrange or remove some dishware from the load,
• May have selected wrong cycle,
You may need to select proper cycle.
Dishes are not dry:
• Vented dry option is off.
You need to check if vented dry option is "ON" position.
• low water temperature,
You may need to regulate water temperature to 120 Degree F / 49 Degree C,
22