Haier HI1MK Installation Instructions Manual page 4

_nstaHation Instruotions
1. Unplug the refrigerator from the power outlet and move it out for easier
access.
2. Remove the ice tray rack by unscrewing the Phillips head screws.
3. Remove the freezer shelf by pushing the shelf to your left until the right
side is free from the holes. Lift the shelf gently and remove.
4. There are 2 plugs on the left side wall and one on the back wall in the
freezer compartment that must be removed. The holes are used to
mount the ice maker and to pull through the water inlet tube.
(See fig. # 1 )
(Figure 1)
5.
6.
7.
3
Remove the electrical plug cover that is mounted on the freezer back
wall.
Unscrew the rear access panel that covers the compressor compartment.
(See fig. # 2) nterior
Condenser
Water Filling
Tube Gromme[
(Figure 2)
I Rear Acc:ss Pane :
Pull out the water fill tube grommet from the rear of the refrigerator.
(See fig. # 2)