Flashing Displag Lights; Using The Dishwasher - GE ADW1000 Owner's Manual

Flashing display lights (model GSD3900 only). 9e.com
Lights
CLEAN
PLUS A
BEEPING
SOUND
PLUS A
BEEPING
SOUND
What It Means
This is normal.
The START/RESET pad
has been pressed.
What To Do
Allow the dishwasher to drain and reset before you start a new wash cycle.
Control Error
Pressthe START/RESET p ad to turn off the beepe_ If the CLEAN light continues
to flash, call for service.
Control Error
Pressthe START/RESET p ad to turn off the beeper and the dishwasher will
attempt to reset.Then restart the wash cycle. If this error continues, call
for service.
Using the Dishwasher Door (model GSD3900 only)
_The door must be closed and locked into place to select a LOAD SELECTION or an OPTION.
If the door is opened during a cgcle and left open, the dishwasherwill beep once every minute until the door
is closed and latched into place.